Hot slip film

Hits： 21 AddTime：2018/09/30

LJ02 Hot slip shrink film Its main advantage is excellent hot slip property. The hot surface of the film without hot slip property usually causes stick after shrinking under high temperature that makes it is hard to put the packages together. LJ02 is your best choice to avoid such difficulities. And LJ02 performs very well on full-atuo high-speed packaging machine. Except for hot slip property, it has all good properties of LJ01.

Main Parameter Data

Product	LJ02 HOT SLIP SHRINK FILM
Property	Unit	Test Method	Representative Value
Physical Property
Thickness	Micron		10 / 12.5	15	19	25
Tensile Property (MD/TD)
Tensile Strength	N/mm²	ASTM-882	115/115	115/115	115/115	115/115
Elongation at Break	%	ASTM-882	105/110	110/110	110/110	115/110
Seal Strength	g/cm³	Internal Method	611	872	1025	1252
Seal Strength	N/mm²	Internal Method	42	58	54	51
Tear Propagation	g/cm³	ASTM-D1938	11	14	16	24
COF film to film	Adim	ASTM-D1894	0.15	0.15	0.15	0.15
Free Shrink at 130℃	%	ASTM-D2732	70/70	70/70	70/70	70/70
Optical Property
Haze	%	ASTM-D1003	1.2	1.4	1.9	2.4
Gloss	photoc	ASTM-D2457	140	143	148	148
Dimension Specification
Thickness	Micron		10 / 12.5	15	19	25
Width	mm		200--1600
Length /roll	S/S(single layer)		3200m	2665m	2135m	1600m
Length /roll	C/F(center fold)		1600m	1332m	1067m	800m

Previous ： Hot slip film

Next : Hot slip film

Tags：